Guitar Side Thickness for Bending Unleash Your Inner Virtuoso

Other builders will have their own take on this process, but this works for me. My ukes sides are normally thinned and finish sanded to about 1.7-1.8mm thick. I ... Luthier and instructor Robert O'Brien shows how to bend guitar sides by hand on a bending iron. ... How Thin Should Guitar Sides Be? DIY Guitar ... I've bent Sides on a Pipe before, but this is the first try at this method. These are for a Baritone Ukulele and are 75mm wide X 1.8mm thick, ... All of the wood for this guitar will be cut from the same billet, except the soundboard and bridge. ... The thin sides are bent over a home-made bending iron, a ... Before bending them, Kinkead, in his book, "Build Your Own Acoustic Guitar", recommends taking them down to 5/64" or just a little over .08 inches thick. I was ... I could have laminated the bend from multiple thin plies, but that ... Guitar sides are bent around a hot iron. (photo used with ... The width of side pieces always starts at the height of the tail block and that dimension will change, depending on the guitar you are planning to build. And so ... How Thin Should Guitar Sides Be? DIY Guitar Making•18K views · 14:07 ... Steel-string acoustic guitar sides could break or crack with over bending. The specific measurement depends on how the wood is thicknessing and bending. I have used .06 for maple mandolin sides, so .065 is a good ... This is the beginning step for this build. I've chosen the set of Brazilian Rosewood that everyone seemed to love so its time to bend the sides. Here you can ...