Bend Your Guitar Strings with Precision The Role of Side Thickness

I think you should be able to go quite a bit thinner than that. On my big Guitars I go as thin as 1.6 mm. Knock at least 0.5 mm off. You ... I have taken mine all down to between .080 and .085" on all the woods I've bent, some by hand and some in my bender machine. This has worked out fine. The purfling is also attractively simple: just a thin line of green framing the back, top, sides and all inlays. ... While I will build him ... Here is a short video for how I do this. Note that the thickness of the sides really matters. My usual target is .085 inches. But I will go lower with harder ... The trick to smooth bending is to work quickly and calmly, paying close attention to what the wood is 'telling you.' Meaning, never force the wood. ... thin as possible and then preparation for bending begins. ... bending something that should really shatter into pieces when bent…into a guitar. Things like cutaways can be very difficult. Everything is possible, but for extra tight bends, make sure you have extra wood to work with, just in case! For ... Guitar sides are usually extremely thin to allow stiff veneer to bend. Those thin sides have to be supported and reinforced so that it doesn't collapse in ... Letting the wood heat up before trying to bend it. · Bending the wood by “rolling” it around the pipe. · Holding the bend in place after taking it off the iron. Bent side, full or semi-hollow, thin-line love thread; NO SLABS. Thread Tools. 03-18-2024, ...