Bend with Confidence How to Determine the Ideal Guitar Side Thickness

Typically they range from the low of about 0.65" to 0.80" and are bent with dry heat. If you make the sides too thick, you'll end up with ... All of the wood for this guitar will be cut from the same billet, except the soundboard and bridge. ... The thin sides are bent over a home-made bending iron, a ... The sides of a guitar are only 2mm (0.08") thick and will therefore bend much more easily than thicker wood. The simplest bending device that could be used ... In this video I show how I make the side bending jig for building a classical guitar. I used 17.5mm plywood, overall template width is 154mm ... I have tried both hand and machine bending. I spritz the sides thoroughly beforehand. I thin sides to 2.2 mm thickness. Has anyone, with Black ... Torres made sides as thin as 1 mm on occasion - way too scary for me, but I've never gone thicker than 2 mm on classical sides, which is my standard. At 2 mm, ... Your thickness is OK, maybe a bit thin, I like to bend sides at 0.070 to 0.085 inches. When I am bending on a hot pipe I don't know the ... The sides, really for most any guitar body, should be 0.075" to 0.080" thick. For curly maple, it helps to treat with Supersoft 2 overnight to help minimize ... Most woods do bend well at the 275 375 range. The only woods that I found to scorch at low temps was lace wood. You should look into a "hot pipe" setup. That is what luthiers do for bending the ribs (sides) of guitars, mandolins, or violins. Basically ...