Thinner Is Better? Understanding Guitar Side Thickness for Bending

I could have laminated the bend from multiple thin plies, but that ... Guitar sides are bent around a hot iron. (photo used with ... I would say that .080" to .085" would be a general average. Some wood may go down to about .065" to .070" again depending. I have tried both hand and machine bending. I spritz the sides thoroughly beforehand. I thin sides to 2.2 mm thickness. Has anyone, with Black ... In this episode of DIY Guitar Making, I discuss the range of appropriate thickness for bending guitar sides. I also talk about the thickness ... I used a thin kerf 7 1/4" (185 mm) blade, so as to waste less material, and to be easier on my saw. I cut from both sides to resaw a thin strip. Other builders will have their own take on this process, but this works for me. My ukes sides are normally thinned and finish sanded to about 1.7-1.8mm thick. I ... How to make a bending iron to bend acoustic guitar sides. Of course, it can be used to bend any kind of wood. Woodworking. Here is a short video for how I do this. Note that the thickness of the sides really matters. My usual target is .085 inches. But I will go lower with harder ... Luthiers rejoice, there's an inexpensive press that will do the job quite nicely. Luthier and woodworker Behrad Gorgani collaborated with Ted ... As with the back, the top should be thinned to about 70-80thou/ 2mm thick. Choose a good side, clean it up, and mark it. Trace the ukulele shape ...