Guitar Bending Simplified Mastering the Impact of Side Thickness

The sides of a guitar are made of very thin wood, usually around 2 mm thick. When the top and back are glued to them, there must be a way to ... Compressed Curly Ambrosia Maple Plank for guitar sides or similar. Resaw to any thickness for bending. 1/4" thickness will bend to a radius as tight as 1" ... That sounds good to me for a flamenco guitar. Mine are about 2.5 mm in the center and 2.0 at the edges. Once it's glued to the sides, the edges ... Michael Bashkin uses it a lot. I've used thicker pieces for fretboards and bridges but have not bent it. ... Joel Noble its great for fretboards. cap10kirk said: I did when I used thin picks (.73 mm Tortex), then I started using thicker picks that didn't require a death grip to hold onto ... Here is a short video for how I do this. Note that the thickness of the sides really matters. My usual target is .085 inches. But I will go lower with harder ... Happy Building , Jason D Sides 1rst Algonquin Guitars. May be ... I can lay that thin blade right on top of the pencil marks, and make ... I spent an afternoon playing with my 'bending iron'. I tried some thin spruce, and it didn't really want to play, but the offcuts of rosewood bent beautifully. Luthiers rejoice, there's an inexpensive press that will do the job quite nicely. Luthier and woodworker Behrad Gorgani collaborated with Ted ... The sides, really for most any guitar body, should be 0.075" to 0.080" thick. For curly maple, it helps to treat with Supersoft 2 overnight to help minimize ...