Bend It Like a Pro The Science Behind Guitar Side Thickness

You should look into a "hot pipe" setup. That is what luthiers do for bending the ribs (sides) of guitars, mandolins, or violins. Basically ... The trick to smooth bending is to work quickly and calmly, paying close attention to what the wood is 'telling you.' Meaning, never force the wood. I spent an afternoon playing with my 'bending iron'. I tried some thin spruce, and it didn't really want to play, but the offcuts of rosewood bent beautifully. How Thin Should Guitar Sides Be? DIY Guitar Making•18K views · 14:07 ... Steel-string acoustic guitar sides could break or crack with over bending. Making an Acoustic Guitar - Making the Sides...Bending by hand and Kerfed Lining. Its guitar making...its live...Bring your best Q's! Carol will ... Other builders will have their own take on this process, but this works for me. My ukes sides are normally thinned and finish sanded to about 1.7-1.8mm thick. I ... There is no standard wood thickness, this will vary from maker to maker, and to some extent even between guitars from the same builder. But the flatter radius is not what makes the guitar easier to bend on. The flatter radius is meant to stop “fret out”. This is where a string ... Our side wood is thicknessed to approximately .095", sealed from moisture, and stored flat. Some builders will thickness-sand it down to approximately .085" ... I was nevertheless nervous before bending these sides, as a guitar side is more complicated than a mandolin. ... The next steps will be to bend ...